APM2.5 ADNS-3080 Optical Flow Sensor
- 0.05 KGS
- Calculated at Checkout
The ADNS-3080 is based on Optical Navigation Technology, which measures changes in position by optically acquiring sequential surface images (frames) and mathematically determining the direction and magnitude of movement.
It contains an Image Acquisition System (IAS), a Digital Signal Processor (DSP), and a four-wire serial port.
The IAS acquires microscopic surface images via the lens and illumination system. These images are processed by the DSP to determine the direction and distance of motion. The DSP calculates the Δx and Δy relative displacement values.
An external microcontroller reads the Δx and Δy information from the sensor serial port. The microcontroller then translates the data into PS2 or USB signals before sending them to the host PC or game console.
- Mice for game consoles and computer games
- Mice for desktop PC’s, Workstations, and portable PC’s
- Integrated input devices
Note: Receive the goods, open the lens holder, remove the protective film, test the ambient light to be sufficient, the light should be strong, and the test surface is better.
Note: Open the lens before use, remove the protective film.
Connecting the sensor to the APM2.5
- Connect VCC, GND, MISO, MOSI, SCLK and NCS pins as shown in the diagram below
- Default mounting is lens pointing down, pins forward